|
F800S/ST
AeroScreen and HeadLight Cover:
More Photos
If you've been looking for an airflow solution
for your F800S/ST we've got it. The AeroFlow AeroScreen is designed to work only
with MadStad Engineering's "RoboBrackets", which allow you to control the height
(12” total adjustment) and angle (forward or back) of the AeroScreen. We think
this a great marriage of two products…the signature AeroFlow protection with the
adjustability of the MadStad brackets…Allows you to tailor the wind protection
to suit your needs.
The screen itself, like all AeroFlow screens, is designed to work best when
angled back with airflow off both sides. When airflows from front and back
combine at the top it smoothes the air leaving the screen, eliminating
turbulence and air pressure. It's also gently flared at the top to shoot the air
another 5-to-6" higher than just a straight screen. This means that you can
easily position the screen to provide a calm pocket of air for the driver and
still be able to look well over the top of the screen.
The screen has compound curves for more strength and better airflow without
turbulence. With more side-to-side curve and wider, than other screens available
for the bike, it directs air out and away from the driver providing much better
hand, arm, and shoulder protection.
Of course all of these results are based upon the settings we use for testing.
Our objective was to come up with a screen that provides the most protection
possible for cold/wet weather riding and the most Touring comfort. Because of
the total adjustability of the MadStad brackets, you can also adjust the screens
to provide more airflow to your body and helmet in hotter weather.
Choose from 3 windscreen heights to best fit your needs. The Short screen is for
drivers up to about 5'-6" tall or for "minimalist" riders who want maximum
airflow to the body but want to get rid of turbulence. The Medium height screen
for riders to 5'-10" tall, Tall height for riders up to 6'-4".
Screen Measurements:
| |
Dimension: |
Standard |
Medium |
Tall |
| |
"A"
(Overall length of plastic) |
18 1/2" |
21 1/2" |
23 1/2" |
| |
|
|
|
|
| |
"B"
(Length of plastic from top mounting screw of
MadStad bracket) |
9 3/4" |
12 3/4" |
14 3/4" |
| |
|
|
|
|
| |
"C"
(Width at bottom of screen) |
20 1/2" |
20 1/2" |
20 1/2" |
| |
|
|
|
|
| |
"D"
(Width at 3" down from top/center of screen) |
17" |
16 1/2" |
16" |
| |
|
|
|
|
| |
|
|
|
|
The top mounting hole of the MadStad bracket
gives a fixed location to measure from and compare to.
Pricing and Availability: In stock, ready to ship.
Short: $159.95
Medium: $174.95
Tall: $184.95
Note: Pricing is for AeroFlow AeroScreen only. Visit www.madstad.com for more
information and pricing for MadStad RoboBrackets, which must be purchased
separately from MadStad. AeroFlow AeroScreen will not mount without MadStad
RoboBrackets. Screens are designed for maximum comfort and protection and were tested at
higher bracket settings. For "Full-Down" adjustment of the screen, to prevent
mirror interference, you'll need to install mirror extensions which space them
an inch away from the fairing. The extensions are designed to give you better
visibility of traffic behind you. Available from www.F800depot.com for $69.00.
AeroFlow F800S/ST HeadLight Cover now available! Protect your expensive
headlight assembly with an AeroFlow HeadLight Cover (HLC). The average cost to
replace a broken HeadLight Cover is over $400! Molded to fit the contours of
your headlight and manufactured with the same high quality plastic used in our
windscreens, the clear HLC virtually disappears when mounted. HLC's attach with
Dual-Lok to provide a cushion for impact and a strong secure hold. $59.95
|
Not Just Windscreens... We Offer Solutions.
